Repair Printer Canon (2)

Canon PIXMA MP110

Resetting overflow error code :

1. Turn on the printer.
2. Click Menu, and then Scan, Copy and Scan again. All - entered the service mode.
3. Select Counter.
4. Click Copy - everything. Waste dropped to zero.
5. Turn off the printer POWER button.

Canon PIXMA MP130

1. Turn on the printer.
2. Press the MENU key, and then SCAN, COPY and SCAN again - entered the service mode.
3. Select NVRAM ACCESS further OK.
4. Select SET ABS-M LEVEL and set value equal to zero.
5. Select SET ABS-R LEVEL (if any) and is set to zero.
6. Turn off the printer POWER button.

Canon PIXMA MP150

1. Without the printer, press the button STOP / RESET and turn it on POWER button.
2. Not when releasing POWER zagoritsya power indicator, press the button 2 times STOP / RESET.
3. Release the power button, and then a second button - you are in a service mode.
4. Indicator recorded a green light. Click the STOP / RESET 4 times.
5. Turn off the printer.

Canon PIXMA MP450

1. Turn off the printer.
2. Hold button Resume/Cancel (red triangle in the circle), click on POWER - an indicator light green.
3. Release the button Resume / Cancel keeping POWER.
4. Click Resume/Cancel 2 times, keeping POWER, and then release all the buttons.
5. When the indicator recorded GREEN - click Resume / Cancel 4 times!
6. Turn off the printer POWER button.

Canon MPC190

Reset Waste Ink :

1. Enter SERVICE MODE By pressing Menu, Copy, Scan, Copy, Copy.
2. Select TEST MODE.
3. Select [8] PRINTER TEST in TEST MODE.
4. Select 3. [EEPROM CLEAR].
5. Select 0. [INK COUNT].
6. Press the [Set] key.
7. Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.